Glass has been widely used in modern times and has always been a product with large market demand. By using specific treatment methods, we can not only give full play to the characteristics of glass, but also make up for its defects, which are no longer subject to the natural properties of glass. The uniquely designed wine bottle will also directly upgrade your product, generate better value and sell at a better price Next, we will introduce the production process and printing method of wine glass bottles.
1、 How are Liquor glass bottles made
Wine bottles are made of quartz sand The specific operation methods are as follows:
First, the mold shall be designed, determined and manufactured. In addition, other auxiliary materials shall be dissolved into liquid at high temperature. In addition, the converted glass tube shall be baked with liquefied gas at high temperature. In addition, the air blower shall be used to make various shapes under the blowing of the air blower, and then the mold shall be injected, cooled, cut and tempered to form a glass bottle Glass bottles generally have rigid marks, which are also made of mold shapes.
In the whole process, the technical personnel for the construction of process wine bottles are highly required. If they are not careful, they will damage the materials and cause great waste.
1. Pretreatment section The pretreatment section of wine glass bottle spraying includes pre stripping, main stripping, surface conditioning, etc. if it is in the north, the temperature of the main stripping part should not be too low, and it needs to be kept warm Otherwise, the treatment effect is not ideal;
2. Preheating section After pretreatment, it is necessary to enter the preheating section, which generally takes 8~10 minutes. It is recommended that the glass bottle should have some residual heat on the sprayed workpiece when it reaches the powder spraying room, so as to increase the adhesion of powder;
3. Soot blowing and purification section of glass wine bottle If the process requirements of the sprayed workpiece are high, this section is essential. Otherwise, if there is a lot of dust adsorbed on the workpiece, there will be a lot of particles on the surface of the processed workpiece, which will reduce the quality;
4. Powder spraying section The key point of this section is the technical problem of the duster. If you want to create good quality, it is worthwhile to pay for a skilled duster
5. Drying section What should be paid attention to in this section is the temperature and baking time. The powder is generally 180~200 degrees, depending on the material of the workpiece In addition, the drying furnace should not be too far away from the powder spraying room. Generally, it is better to be 6 meters away.
6. To design, determine and manufacture the mold, the glass raw material takes quartz sand as the main raw material, plus other auxiliary materials to melt into liquid at high temperature, and then inject into the mold, cool, cut and temper to form the glass bottle. Glass bottles generally have rigid marks, which are also made of mold shapes. According to the manufacturing methods, the molding of glass bottles can be divided into three types: manual blowing, mechanical blowing and extrusion molding. Glass bottles can be divided into the following types according to their composition: sodium glass, lead glass and borosilicate glass. The use of lead glass will cause harm to human body. Some cheap glass bottles are made of this kind of raw material When you use this product, you will find that the price of glass bottles is very low at the beginning, which saves money After receiving the goods, you will find that the quality of the samples is different from that of the bulk goods. Once there is a customer complaint, you will have various claims and lawsuits due to a series of quality problems, and you will be in endless trouble
The raw materials of our factory do not use leaded glass at all. Our products can pass multiple certifications such as FDA and LFGB. If you need our certificates, you can contact me
The main raw materials of glass bottles are natural ore, quartz stone, caustic soda, limestone, etc. The glass bottle has high transparency and corrosion resistance, and will not change the material properties in contact with most chemicals. The utility model has the advantages of simple manufacturing process, free and changeable shape, large hardness, heat resistance, cleanness, easy cleaning, and can be used repeatedly. As a packaging material, glass bottles are mainly used for food, oil, wine, beverages, condiments, cosmetics, liquid chemical products, etc., and are widely used. Almost all high-end products are packed in glass bottles If you are interested, we can show you the design and product pictures of our partners
Related concepts
The wine bottle
A wine bottle is a container for wine. In history, wine bottles were mostly presented to the world in the simple style of “soy sauce bottle”, glass material, less information and no decoration. Since the reform and opening up, the wine bottle that once made people despise has suddenly emerged and been looked at differently. Wine bottles are becoming more and more colorful, showing a prosperous scene of flowers competing for beauty. As a cultural landscape, wine bottles have become an important part of wine culture. If the traditional folk wine bottle in the past paid more attention to daily use and practicality, then the modern wine bottle has added artistry, ideology and scientificity. The connotation of modern wine bottle is rich. It has gone beyond the concept of merely serving wine container, and has become a unique packaging art category and a carrier of refined and popular culture.
Post time: 6月-20-2022
